Smoked Front Reflector Styling
2012–2019 Porsche 911 Carrera 991.1 & 991.2 Front Side Reflector Smoked Tint Overlays
Give the front end of your 2012–2019 Porsche 911 Carrera a cleaner, darker appearance with precision-cut smoked tint overlays designed for the factory front side reflectors. The transparent smoked finish tones down the factory reflector color while allowing the original reflector surface to remain visible beneath the film.
Transparent Smoke Darkens the factory reflector appearance without using an opaque painted or solid-vinyl finish.
Driver + Passenger Set One order includes matching overlays for both front side reflectors.
991.1 + 991.2 Fitment Designed for compatible factory reflector shapes across the 2012–2019 Porsche 911 Carrera range.
Clean Front-End Appearance
Tone Down the Factory Side Reflectors
The factory front side reflectors create a bright contrasting detail on the front bumper of the Porsche 991. These transparent smoked tint overlays reduce that contrast and help the reflectors blend more naturally with the surrounding bumper, intake and exterior trim.
Each piece is pre-cut for its intended side, eliminating the need to begin with a universal sheet of tint film. The result is a simple exterior styling change that maintains the original reflector underneath.
Transparent Tint Finish
Creates a smoked appearance while retaining the underlying shape and texture of the factory reflector.
Precision-Cut Shape
Pre-cut for the intended factory front side reflector application to simplify positioning and installation.
Reversible Styling
Changes the reflector appearance without replacing or permanently modifying the factory component.
Matching Two-Side Coverage
Includes separate driver-side and passenger-side overlays for a balanced finished appearance.
Designed for the Reflector Surface Only
These overlays cover the compatible factory front side reflectors. They are not complete bumper wrap pieces and do not replace the reflector assemblies.
Product Details
Smoked Reflector Overlay Specifications
- Application: Factory front bumper side reflectors
- Finish: Transparent smoked tint
- Coverage: Driver-side and passenger-side reflectors
- Product type: Pre-cut automotive tint overlays
- Vehicle platform: Porsche 911 Carrera 991.1 and 991.2
- Model years: 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019
- Permanent modification: Not required
Package Contents
What You Will Receive
- One pre-cut driver-side front reflector smoked tint overlay
- One pre-cut passenger-side front reflector smoked tint overlay
- Complete coverage for one compatible vehicle
Factory reflectors, replacement reflector assemblies, installation tools and professional installation are not included.
Vehicle Compatibility
Porsche 911 Carrera 991.1 & 991.2 Fitment
This smoked front side reflector overlay set is designed for compatible factory reflector configurations found on the following Porsche 911 Carrera model years:
2012 Porsche 911
2013 Porsche 911
2014 Porsche 911
2015 Porsche 911
2016 Porsche 911
2017 Porsche 911
2018 Porsche 911
2019 Porsche 911
Verify Your Reflector Shape
Compare the factory front side reflectors on your vehicle with the product images before ordering. Replacement bumpers, aftermarket reflectors, body conversions, previous repairs or regional equipment differences may affect fitment.
Installation
Smoked Tint Overlay Installation
-
Confirm the pieces.
Identify the driver-side and passenger-side overlays and compare each piece with its corresponding factory reflector before removing the film from the backing liner.
-
Clean the reflectors.
Remove dirt, wax, grease, ceramic products and detailing residue from each reflector. Complete the final cleaning with an appropriate surface-preparation cleaner and a clean microfiber towel.
-
Test the alignment.
Position each overlay over the intended reflector and identify the perimeter, corners and reference points before exposing the adhesive.
-
Position the overlay.
Carefully align the pre-cut film with the factory reflector. Lightly secure one area first so you can verify the remaining perimeter before applying full pressure.
-
Apply controlled pressure.
Work gradually across the film using a clean felt-edge squeegee or wrapped application card. Push trapped air toward the nearest edge instead of pressing it deeper beneath the overlay.
-
Secure the perimeter.
Inspect every edge and corner. Use controlled pressure to ensure the complete perimeter is seated against the clean reflector surface.
-
Complete the second side.
Repeat the same preparation and installation process on the opposite reflector, then compare both sides for matching placement.
Installation Recommendation
Install in a clean, controlled environment and avoid applying the film to an excessively hot, cold, wet or contaminated reflector. Professional installation is recommended for customers unfamiliar with applying automotive tint film.
Care Guidance
Protect the Finished Installation
- Allow the film adhesive to set before washing the vehicle.
- Avoid directing concentrated high-pressure water at the overlay edges.
- Clean the reflectors with vehicle-safe products and a soft microfiber towel.
- Do not scrape, pick or repeatedly rub the film perimeter.
- Appearance and service life vary with installation, climate, vehicle storage, exposure and maintenance.
Frequently Asked Questions
Product FAQ
Does one order include both front reflector overlays?
Yes. One order includes one driver-side overlay and one passenger-side overlay for a complete matching set.
Are replacement reflector assemblies included?
No. This product includes pre-cut smoked tint overlays only. The original compatible factory reflectors remain installed underneath.
Is the film completely opaque?
No. The smoked film is transparent tint designed to darken the visible appearance of the factory reflector rather than completely conceal it with an opaque finish.
Does the product fit both 991.1 and 991.2 models?
The set is designed for compatible factory front side reflector configurations across the stated 2012–2019 Porsche 911 Carrera range. Compare your reflector shape with the product images before ordering.
Does installation require removing the reflectors?
The overlays are intended to install over the visible face of the compatible factory reflectors. Permanent modification is not required.
Can the smoked overlays be removed later?
Automotive tint film can generally be removed using controlled heat and proper removal techniques. Extra care is required on repaired, repainted, peeling, cracked or otherwise compromised surfaces.
Premium Auto Styling
Vehicle-Specific Styling Support
Premium Auto Styling develops and prepares vehicle-specific styling products from Riverside, California. Our team is available to help with product selection, fitment questions and installation guidance before you begin.
Read Verified Customer Reviews
Give Your Porsche 991 a Cleaner Front-End Look
Tone down both factory front side reflectors with a matching transparent smoked tint overlay set for the 2012–2019 Porsche 911 Carrera 991.1 and 991.2, prepared by Premium Auto Styling in Riverside, California.
Fitment and aftermarket-product disclaimer: Compatibility is based on the compatible factory front side reflector configuration represented in the product images. Replacement bumpers, aftermarket reflectors, body conversions, previous repairs and regional equipment differences may affect fitment. This product modifies the visible appearance of the covered reflectors and may affect reflected light. Check applicable local requirements before installation. Removal should be performed carefully, particularly on repaired, repainted, peeling, cracked or otherwise compromised surfaces. Porsche, 911, Carrera, 991.1 and 991.2 names and trademarks are used solely to describe vehicle compatibility. Premium Auto Styling is not affiliated with or endorsed by Porsche AG.
