Headlight PPF Install Guide
Wet-install guide for every pre-cut PPF kit: headlights, full front kits, and pre-cut protection pieces. Includes our VOIR solution mixes (slip, panel tack, hard tack), the five install steps, aftercare, and troubleshooting.
SKUs: all PPF families (AP-, APHP-, C-series, H-132, H-133, HP-C8, and every SKU containing PPF)
Download PDF
Windshield Banner Install Guide
Universal trim-to-fit install for every windshield and window banner we sell: blank banners, logo banners, and vehicle-specific banners. Covers measuring the windshield (58 in x 14 in before trimming), setting the finished banner depth, taping and positioning, application, and trimming.
SKUs: all banner families (BAN013-BAN021, BAN055, BAN056, FSCRIPT, GHST, and legacy banner SKUs)
Download PDF
Headlight Tint Wet Install Guide
Wet install for pre-cut vinyl headlight tint overlays: clean and test-fit, mist and align, squeegee the solution out, and finish the edges.
SKUs: H and HLC family, smoked (SMK) finishes, non-LUX
Download PDF
Reflector Tint Wet Install Guide
Wet install for reflector tint overlays, both the amber corner reflector inside the headlight and rear bumper reflectors.
SKUs: R family, smoked (SMK) finishes
Download PDF
Wet Install Guide (Tail Light Tint)
The general wet-install sheet: prep with isopropyl, mist with a drop of soap, align, squeegee outward, warm the edges, and let it set in the shade. Shown on tail light tint; the same method covers our other wet-install overlays.
SKUs: T and TL family, smoked (SMK) finishes
Download PDF
Accord DRL Install Guide
Step-by-step for the 2018–2022 Honda Accord DRL overlay kits in yellow, amber, red, and pink. Includes the install order for the multi-piece DRL strip.
SKUs: A-222 family
Download PDF
Civic DRL Install Guide
Step-by-step for the 2022–2026 Honda Civic (11th gen) DRL overlay kits. Note the Civic install order runs in reverse of the Accord.
SKUs: A-213 and A-214 families
Download PDF
Lamborghini Urus DRL Install Guide
Step-by-step for the 2019–2024 Lamborghini Urus DRL overlay kit, including the smoked version.
SKUs: S-156 family
Download PDF
Gloss Black + DRL Dry Install Guide
Dry install for the two-piece DRL combo overlays (gloss black border plus colored DRL strip), all colors: test-fit both sides, start at the grille and work out to the fender, then peel the transfer tape flat at 180 degrees.
SKUs: A-218 and A-219 families (2021–2025 Acura TLX DRL kits)
Download PDF
Acura Emblem Install Guide
For Acura MDX and TLX front emblem overlays. Covers alignment and seating the overlay on the factory front emblem.
SKUs: E-210, E-211, E-212, E-213 families
Download PDF
Lexus Emblem Install Guide
For Lexus front emblem overlays across the range (GX 550 shown). The center-first technique for curved emblem faces: lock a strip down the middle, then work the air out to both sides, with gentle heat to conform.
SKUs: E-155, E-156, E-168, E-169, E-171, E-172, E-173 families
Download PDF