2022 Subaru WRX | Vinyl Emblem Overlay Kit (Choose Your Color) by Premium Auto Styling

Give your 2022 Subaru WRX a cleaner, more personalized appearance with precision-cut vinyl emblem overlays from Premium Auto Styling. This complete kit transforms the factory blue-and-chrome Subaru emblems without requiring emblem removal or permanent modification.

Each overlay is computer-cut from premium automotive-grade vinyl for accurate, vehicle-specific fitment. Choose the finish that complements your WRX and install the overlays directly over the factory emblem faces for a clean, OEM-inspired result.

What’s Included

• One front grille emblem vinyl overlay
• One rear trunk emblem vinyl overlay
• One steering wheel emblem vinyl overlay

Premium Quality & Easy Customization

• Adhesive-backed automotive vinyl for a simple peel-and-stick installation
• Changes the appearance of the factory emblems without replacing them
• Durable, low-maintenance finish designed for normal exterior use
• Car-wash safe after the adhesive has fully cured
• Removable without permanently modifying the factory emblems
• Estimated service life of 2–5 years depending on the selected finish, climate, exposure and maintenance

Installation Guide

Step 1: Prepare the Emblems

Thoroughly clean each factory emblem to remove dirt, dust, wax, ceramic products and other surface contaminants. The emblem must be completely clean and dry before installation. For the best adhesion, complete the final cleaning step with a vinyl-safe surface-preparation solution.

Step 2: Check the Installation Conditions

Install the overlays in a clean, shaded and temperature-controlled environment. Do not install in direct sunlight or on a hot, cold or wet surface. For the best results, we recommend an installation temperature between 65°F and 72°F.

Step 3: Test the Alignment

Before removing the backing paper, position the overlay over the corresponding factory emblem to understand its shape, orientation and proper alignment. Confirm that you have the correct overlay before beginning the application.

Step 4: Align and Apply

Carefully remove the overlay from its backing and align it with the shape and edges of the factory emblem. Avoid allowing the entire adhesive surface to make contact until you are satisfied with the positioning. Begin applying from one area and work gradually across the emblem using your fingertip or a soft application tool.

Step 5: Secure the Edges

Once properly aligned, press firmly across the entire overlay—especially around the perimeter—to activate the adhesive. Avoid washing the vehicle or exposing the overlays to unnecessary moisture for at least 24 hours after installation.