Black out all three factory emblems on your second-generation Subaru BRZ
with the Premium Auto Styling Stealth Emblem Overlay Kit.
This complete three-piece package combines a
satin black base with gloss black stars for a subtle,
tone-on-tone transformation of the front grille, rear trunk and steering
wheel emblems.
Complete 3-Piece Kit
Includes the front grille, rear trunk and steering wheel emblem overlays.
Satin + Gloss Contrast
A low-sheen satin black base is paired with reflective gloss black stars.
2022–2026 BRZ Fitment
Precision cut around the factory emblems on the second-generation Subaru BRZ.
Dedicated Stealth Colorway
Satin Black Base. Gloss Black Stars.
The Stealth Edition replaces the factory blue emblem appearance with two
complementary black finishes. The result is a clean blackout effect that
preserves the recognizable Subaru star pattern through differences in sheen.
Satin Black Base
The low-sheen satin black background reduces reflections and creates the
foundation for the understated blackout appearance.
Gloss Black Stars
The reflective gloss black stars catch more light than the satin base,
revealing the original star design as the lighting and viewing angle change.
From a distance, the emblems maintain a dark, nearly blacked-out appearance.
Up close and under direct lighting, the contrast between the satin base and
gloss stars becomes more noticeable.
Flat Vinyl Overlay Construction
The satin black and gloss black elements are thin automotive vinyl layers.
The stars are not molded, domed, beveled or raised from the emblem surface.
One Kit Completes All Three Emblems
This product is a complete vehicle package, not a single emblem overlay.
Every order includes all three vehicle-specific pieces needed to create a
coordinated Stealth Edition appearance across the exterior and interior.
1Front Grille Emblem
Satin black and gloss black overlay for the original front grille emblem.
2Rear Trunk Emblem
Matching Stealth Edition overlay for the original rear exterior emblem.
3Steering Wheel Emblem
Coordinating interior overlay for the emblem in the center of the steering wheel.
Front + Rear + Steering Wheel Included
One order includes the complete three-piece Stealth Emblem Overlay Kit.
You do not need to purchase the individual emblem locations separately.
Designed for a True Blackout Appearance
The Stealth Edition was created for BRZ owners who want to eliminate the
factory blue emblem color while maintaining subtle definition in the
original star design.
Using satin and gloss black together creates a more refined result than a
completely flat single-color blackout. The star pattern remains discreet
in normal lighting and becomes more visible when light reflects from the
gloss black surface.
This finish complements black wheels, tinted lighting, carbon-fiber
components, dark exterior trim and other stealth-inspired modifications.
Premium Automotive-Grade Vinyl
Each 2022–2026 Subaru BRZ Stealth Emblem Overlay is manufactured from
premium automotive-grade adhesive vinyl selected for clean application,
stable color and reliable performance on properly prepared surfaces.
This is not a replacement plastic badge or generic paper sticker. Each layer
is precision cut for its corresponding factory emblem. The satin black base
and gloss black star design install flat across the visible face of the
original badge.
The exterior front and rear overlays are designed to withstand normal
exposure to sunlight, rain and routine vehicle washing when installed
correctly. The removable vinyl construction allows you to customize the
original emblems without painting, drilling or replacing them.
Precision cut for the corresponding factory BRZ emblem shapes
Premium automotive-grade adhesive vinyl
Flat, low-profile overlay construction
No molded, domed, raised or beveled design elements
Installs directly over the visible factory emblem surfaces
No original emblem removal required
No drilling, painting or permanent badge modification required
Made to order by Premium Auto Styling in Riverside, California
Vehicle Fitment
2022 Subaru BRZ
2023 Subaru BRZ
2024 Subaru BRZ
2025 Subaru BRZ
2026 Subaru BRZ
Factory BRZ Emblems
Installation locations: Original front grille emblem,
original rear trunk emblem and original steering wheel emblem.
Verify Your Original Emblems
This kit is designed around the original 2022–2026 Subaru BRZ emblem
shapes. Compare all three emblems on your vehicle with the listing photos
before ordering, especially if a badge has previously been replaced with
an aftermarket emblem.
Easy DIY Installation
No emblem removal is required. Each precision-cut vinyl piece applies
directly over its corresponding factory emblem, making this an approachable
exterior and interior appearance upgrade.
Cool the application surfaces.
Move the vehicle indoors or into a shaded area and allow the exterior
emblems to become cool to the touch.
Clean all three factory emblems.
Remove dust, dirt, wax, polish, grease and interior dressing from the
front, rear and steering wheel emblems.
Complete the final preparation.
Wipe each application area with isopropyl alcohol and a clean microfiber
towel, then allow the surface to dry completely.
Identify the correct overlay.
Match each precision-cut piece to the front, rear or steering wheel emblem
before exposing the adhesive.
Confirm the alignment.
Position the overlay above the emblem and identify the perimeter and
important alignment points before application.
Apply the vinyl gradually.
Lay the overlay from one side to the other while using a clean fingertip
or felt-edge squeegee to minimize trapped air.
Secure the complete design.
Apply firm final pressure across the satin black base, gloss black stars
and complete outer perimeter.
Repeat for all three emblems.
Complete the front, rear and steering wheel locations to create a matching
Stealth Edition appearance throughout the BRZ.
Recommended Installation Conditions
Install in a clean, dry and temperature-controlled environment. Do not
apply the overlays to hot, waxed, ceramic-coated, greasy or contaminated
emblem surfaces. Never spray cleaning solution directly into the steering
wheel or airbag assembly.
Watch the Emblem Overlay Installation
Watch our installation guide before beginning to see the recommended surface
preparation, alignment and application process for Premium Auto Styling
emblem overlays.
Factory emblems are not included. This product contains
precision-cut vinyl overlays designed to install over the original emblems
already on your vehicle.
Made to Order in Riverside, California
Dedicated Colorway
Preconfigured with the satin black base and gloss black star combination.
Ships from California
Each made-to-order kit is prepared and shipped by our Riverside team.
Real Product Support
Ordering and installation guidance is available before and after purchase.
Complete the front grille, rear trunk and steering wheel with one
vehicle-specific Stealth Edition kit featuring a satin black base and
gloss black stars.
Aftermarket product disclaimer: This product includes vinyl
overlays only. Factory emblems, replacement badges and vehicle components are
not included. Premium Auto Styling is not affiliated with, sponsored by or
endorsed by Subaru Corporation or Toyota Motor Corporation. Subaru, BRZ and
related vehicle names and trademarks are used solely to describe product
compatibility. Factory emblem configurations may vary if the vehicle has been
repaired, modified or fitted with aftermarket badges. Confirm the shape of all
three original emblems before ordering.
