2019-2026 BMW M340i/G20 & M3/G80 Taillight Red Tint Vinyl Overlays

Transform the Factory Clear Taillight Sections

The factory clear sections can interrupt the otherwise aggressive red taillight design of the BMW G20 3 Series, BMW M340i and BMW G80 M3. These transparent red taillight overlays visually blend those clear sections into the surrounding red lens for a more uniform, performance-inspired appearance.

Because the film remains transparent, the underlying lens texture and internal taillight details remain visible. The result is a refined red-tinted finish—not the flat appearance of an opaque blackout decal.

Product Features

• Pre-cut transparent red taillight tint overlays.
• Designed for the factory clear sections of compatible BMW taillights.
• Gloss transparent red finish preserves visible lens details.
• Complete driver- and passenger-side set.
• Vehicle-specific shapes reduce trimming and guesswork.
• Installs over the exterior surface of the factory taillight lens.
• Suitable for experienced DIY installation or professional installation.
• Designed and produced by Premium Auto Styling in Riverside, California.

Product Specifications

Product type: Pre-cut taillight tint vinyl overlays

Application: Factory clear portions of the rear taillights

Color: Transparent red

Finish: Gloss

Coverage: Driver and passenger sides

Installation method: Exterior adhesive-film application

Installation level: DIY friendly; professional installation available

BMW Vehicle Fitment

Designed for compatible factory taillights found on the following BMW G20 3 Series and G80 M3 applications:

DIY Installation Guide

Install the overlays in a clean, shaded and temperature-controlled area. Avoid installing on a hot lens, in direct sunlight or over contaminated surfaces.

1. Inspect the taillights.
   Confirm that the lens is cool, undamaged and free from peeling coatings, wax, sealant or previous adhesive residue.
2. Clean the lens thoroughly.
   Wash and dry the application area, then remove remaining oil, wax and contamination using a surface-safe preparation solution and a clean microfiber towel.
3. Test the alignment.
   Position each overlay over its corresponding clear taillight section before removing the backing paper. Identify the correct driver-side and passenger-side pieces.
4. Begin application.
   Peel back a small portion of the liner, establish the starting edge and lightly tack the film into position. Do not apply full pressure until alignment is confirmed.
5. Apply the overlay.
   Work gradually across the lens using overlapping strokes with a clean felt-edge squeegee or wrapped fingertip. Avoid trapping air or stretching the precut shape.
6. Set the edges.
   Carefully work around the perimeter and confirm that every edge is fully seated. Use controlled heat only when necessary; excessive heat can distort the film.
7. Final inspection.
   Check the overlay from multiple angles and allow the adhesive to settle before washing the vehicle or exposing the installation to unnecessary moisture.

Frequently Asked Questions

Is this solid red vinyl?
No. This product uses transparent red tint film, allowing the factory lens texture and internal taillight details to remain visible through the overlay.

Does one order include both taillights?
Yes. This product is sold as a complete set for the driver and passenger sides.

Do I need to remove the taillights?
The overlays are designed for exterior application to the accessible lens surface. Removal of the complete taillight assembly is not normally required.

Can I install the kit myself?
Yes. The pre-cut design makes this a practical DIY appearance modification for customers comfortable working with automotive film. Professional installation is also available at our Riverside location.

Can the overlays be removed?
Automotive film can generally be removed from sound factory-condition lenses. Additional care may be required on repaired, coated, cracked or otherwise compromised surfaces.

Premium Auto Styling Support

Premium Auto Styling develops vehicle-specific automotive overlay products in Riverside, California. Each pattern is created to follow the intended factory component so customers can achieve a cleaner installation with less trimming and guesswork.

Whether you are completing the installation at home or bringing your BMW to our Riverside facility, our team is available to help you select and install the correct taillight overlay package.