Give your 2022–2026 Subaru WRX a darker, more distinctive rear-end appearance with our Inner Tail Light Tint Overlays in Honeycomb Medium Smoke. These overlays are applied over the factory turn-signal and reverse-light sections to reduce their bright appearance while adding a unique honeycomb pattern.
Each overlay is precision-cut specifically for the factory WRX inner tail lights. The honeycomb medium-smoke finish adds depth and texture without completely hiding the original lens design. With a simple installation and noticeable visual impact, this is an excellent beginner-friendly upgrade for your WRX.
WRX Inner Tail Light Tint Overlays
✓ Covers the factory turn-signal and reverse-light sections
✓ Adds a distinctive honeycomb pattern
✓ Honeycomb medium-smoke tint finish
✓ Precision-cut for vehicle-specific fitment
✓ Includes driver-side and passenger-side overlays
✓ Easy, beginner-friendly DIY installation
✓ Removable without permanently modifying the factory lights
✓ Designed, tested and produced at our USA facility
What’s Included
- One driver-side inner tail light tint overlay
- One passenger-side inner tail light tint overlay
- Complete two-piece honeycomb medium-smoke tint kit
Vehicle Fitment Designed for the factory inner tail lights on the 2022–2026 Subaru WRX. Please confirm your vehicle year and factory tail light design before ordering. This product includes tint-film overlays only and does not include replacement tail lights.
Available Color: Honeycomb Medium Smoke Tint Honeycomb Medium Smoke Tint provides a darker, more aggressive appearance with a patterned finish that adds texture and detail to the factory inner tail lights. The final appearance may vary depending on lighting conditions and viewing angle.
Designed, Tested & Produced in the USA Premium Auto Styling overlays are computer-cut from premium automotive-grade film at our own USA facility. Every vehicle-specific product is designed and test-fitted on a real vehicle to help provide accurate fitment and dependable installation results.
Features & Specifications
- Fits 2022–2026 Subaru WRX
- Covers the inner turn-signal and reverse-light sections
- Honeycomb medium-smoke tint finish
- Includes driver-side and passenger-side overlays
- Complete two-piece kit
- Precision-cut premium automotive-grade film
- Adhesive-backed film for straightforward installation and removal
- Low-maintenance and automatic-car-wash safe after fully cured
- Removes without permanently modifying the factory lenses
- Estimated outdoor durability of 2–5 years depending on climate, exposure, installation and maintenance
Watch the Installation Video
Watch the installation video before beginning. It demonstrates the recommended surface preparation, positioning, squeegee and finishing techniques for this WRX inner tail light overlay.
Wet Installation Guide
A wet installation makes it easier to position each overlay accurately before securing it. Experienced installers may choose to install the film dry, but wet installation is recommended for most first-time DIY customers.
Recommended Tools
- Felt-edge or hard application squeegee
- Premium Surface Lube or vinyl-safe slip solution
- Vinyl-safe surface-preparation cleaner
- Clay bar, if needed
- Clean microfiber towels
- Heat gun or hair dryer
- Precision blade only if minor trimming is required
Step 1: Prepare the Tail Lights
Thoroughly clean each inner tail light to remove dirt, road film, wax, ceramic products and other contaminants. Use a clay bar when necessary, then complete the final cleaning step with a vinyl-safe surface-preparation solution. The lenses must be completely clean before installation.
Step 2: Check the Installation Conditions
Work in a clean, shaded and temperature-controlled environment. Never apply the overlays in direct sunlight or to hot, cold or wet lenses. For the best results, install between 65°F and 80°F. Installation may be possible between 50°F and 90°F, but additional care may be required.
Step 3: Prepare the Slip Solution
Use Premium Surface Lube or another vinyl-safe slip solution. If a professional solution is unavailable, mix approximately 16 ounces of clean water with one small drop of mild dish soap. Use only a fine mist—less solution is better for this installation.
Step 4: Identify and Position the Overlays
Identify the driver-side and passenger-side pieces before removing the backing. Lightly mist the lens and adhesive side of the film, then position the overlay over the inner turn signal and reverse-light section. Confirm that the perimeter and honeycomb pattern are properly aligned before securing the film.
Step 5: Squeegee the Film
Hold the overlay in position and begin squeegeeing from the center toward the outer edges. Use controlled, overlapping strokes to push the slip solution and trapped air out from beneath the film.
Step 6: Conform and Secure the Edges
Apply gentle heat where necessary to soften the film and help it conform around bends, corners and lens contours. Avoid overheating or overstretching the material. Continue removing moisture and firmly press every edge once alignment is complete.
Step 7: Inspect and Allow to Cure
Inspect both overlays for trapped moisture, air pockets or unsecured edges. Allow the vehicle to remain in a warm, dry environment while the remaining moisture evaporates. Avoid washing the vehicle or exposing the overlays to unnecessary moisture for at least 24 hours.
Trimming & Installation Notice Some overlays may include a small amount of additional material to make alignment easier. Minor trimming may be required. Use extreme care around the factory lenses and surrounding painted surfaces. Professional installation is recommended if you are uncomfortable using a blade or heat source.
Installation Difficulty: 1/5 ★☆☆☆☆ This is a beginner-friendly installation suitable for first-time DIY installers. Thoroughly clean the lenses, use a light mist of slip solution and take your time aligning each overlay—piece of cake.
Show Us Your WRX Share a photo of your completed installation and tag @premiumautostyling on Instagram.
Looking for a Custom Finish? Interested in a different color or finish? Contact our team at
orders@premiumautostyling.com before ordering so we can review your request.
Product Disclaimer This product is a tint-film overlay designed to cover portions of the existing factory tail lights. It is not a replacement tail light or paint protection film. Tint film and the honeycomb pattern may reduce or alter visible light output. Customers are responsible for confirming compliance with all applicable state and local vehicle-lighting laws before installation or use on public roads. Product appearance may vary depending on lighting, viewing angle and screen settings.
