Professional-Grade Full-Truck Graphics
Ford F-150 Universal Dual Racing Stripe Kit
Give your Ford F-150 a bold, performance-inspired appearance with the
Premium Auto Styling Universal Dual Racing Stripe Kit.
This complete automotive vinyl graphic package creates a continuous
center-stripe design across the hood, roof, tailgate and bumper without
the expense or permanent commitment of a custom-painted finish.
Professional Wrap Film
Manufactured from automotive-grade car-wrap vinyl with air-release adhesive.
Four-Section Kit
Separate hood, roof, tailgate and bumper sections simplify handling and alignment.
Universal Trim-to-Fit
Designed around Ford F-150 and modern full-size-truck proportions.
Complete Center-Stripe Transformation
Transform the appearance of your Ford F-150 with a modern dual racing-stripe
system that extends from the front of the truck to the rear. The wide primary
stripes create an aggressive performance-inspired foundation, while the
narrow outer pinstripes give the design a more finished and dimensional appearance.
Unlike a single bulk roll of stripe material, this kit is divided into four
manageable application sections. Every section maintains the same primary-stripe
width, center gap and outer accent spacing for a visually consistent design
across the hood, roof, tailgate and bumper.
Material Quality Matters
Professional Car-Wrap Vinyl, Not Cheap Sticker Material
This kit is produced using
professional-grade automotive car-wrap material. It is not
manufactured from inexpensive craft vinyl, permanent sign vinyl or generic
sticker material that was never designed for use across large painted vehicle panels.
The vinyl features a specialized air-release adhesive system
that helps trapped air escape through microscopic channels during application.
This makes it easier for an experienced installer to position and apply the
large graphics with fewer bubbles, creases and installation defects.
Air-Release Adhesive
Microscopic adhesive channels help installers move trapped air toward the
edge of the graphic during application.
Made for Vehicle Panels
The film is intended for automotive exterior styling and large-format
painted-surface applications.
Removable Styling
Change the appearance of your truck without permanently painting the
factory body panels.
Protect the Quality of Your Truck
Low-quality sticker vinyl may use overly aggressive adhesives, become
brittle, leave difficult residue or create unnecessary removal concerns.
Professional wrap film is the correct material category for a large-format
automotive graphic of this size. For the safest results, the film must be
installed and eventually removed correctly from sound, properly cured
factory paint.
Dual-Stripe Dimensions
Every application section follows the same proportional layout to maintain a
consistent stripe design from the front of the truck to the rear.
8 Inches
Width of Each Primary Stripe
1 Inch
Gap Between Primary Stripes
¼ Inch
Main-to-Accent Separation Gap
- Two 8-inch-wide primary racing stripes
- 1-inch center gap between the two primary stripes
- Thin outer accent pinstripe beside each primary stripe
- ¼-inch separation between each main stripe and outer pinstripe
- Consistent proportions throughout all four application sections
Complete Four-Section Stripe Kit
Dividing the design into vehicle-area sections makes the large graphic easier
to organize, align and apply than one continuous roll of striping material.
1
Hood Stripe Section
Creates the primary front-facing stripe layout across the hood.
2
Roof Stripe Section
Continues the dual-stripe proportions across the cab roof.
3
Tailgate Stripe Section
Carries the complete racing-stripe design across the rear tailgate.
4
Bumper Stripe Section
Completes the rear-facing graphic across the compatible bumper area.
Extra Material for Final Finishing
The oversized straight ends provide additional material for final positioning,
trimming and wrapping around compatible panel edges. Final trimming is
completed during installation.
Important Universal Fitment Information
Ford F-150
Full-Size Trucks
Universal Trim-to-Fit
This is a universal trim-to-fit stripe kit designed around
Ford F-150 and full-size-truck proportions. It is pre-cut into manageable
application sections, but it is not contour-cut for one specific model year,
hood, bumper, roof or cab configuration.
Final positioning, edge finishing and trimming are performed on the vehicle
during installation. Truck configurations can vary according to model year,
cab style, hood design, tailgate, bumper, roof equipment and installed accessories.
Test-Fit Before Installation
Position and measure every section before exposing the adhesive or trimming
the material. Confirm the truck’s exact centerline and verify that the
selected placement works with all emblems, handles, cameras, antennas,
spoilers, trim and other equipment.
Product Features
- Designed specifically with Ford F-150 owners in mind
- Suitable for a wide range of full-size-truck configurations
- Professional-grade automotive car-wrap vinyl
- Air-release adhesive technology for controlled application
- Not manufactured from generic craft vinyl or cheap sticker material
- Four manageable pre-cut application sections
- Complete hood, roof, tailgate and bumper graphic layout
- Two wide primary stripes with matching outer accent pinstripes
- Consistent stripe proportions across every application section
- Oversized ends provide working material for final trimming
- No permanent paint modification required
- Available in multiple automotive vinyl colors and finishes
- Made to order by Premium Auto Styling in Riverside, California
Installation Instructions
Due to the size and length of these graphics,
professional installation is strongly recommended.
Large-format stripes require accurate measurements, consistent tension,
professional trimming and careful finishing around body-panel transitions.
-
Inspect the vehicle.
Confirm that the paint is sound, properly cured and free from peeling clear
coat, repairs, loose paint or other visible defects.
-
Wash and decontaminate the surfaces.
Remove dirt, road film, wax, grease, polish, ceramic coating and detailing residue.
-
Establish the exact centerline.
Measure the vehicle carefully and mark the center of each application area
using automotive-safe removable masking tape.
-
Test-position every section.
Align the complete hood, roof, tailgate and bumper sections before removing
any release liner or making permanent cuts.
-
Apply the vinyl gradually.
Remove the release liner in controlled sections and apply the film using a
professional felt-edge squeegee.
-
Use the air-release technology.
Work from the center outward so air can move through the adhesive channels
and escape toward the edges.
-
Trim the panel transitions.
Carefully finish the vinyl at panel gaps, edges, emblems, handles and other
vehicle-specific interruptions.
-
Finish compatible edges.
Wrap and secure appropriate edges using professional car-wrap techniques,
without overstretching the vinyl.
-
Post-heat and inspect.
Follow the vinyl manufacturer’s recommended finishing procedures, inspect
all edges and verify complete adhesion before returning the truck to service.
Recommended Installation Environment
Install indoors in a clean, dry and temperature-controlled workspace. The
vehicle panels must be cool to the touch. Do not install in direct sunlight,
outdoors in windy conditions or over waxed, coated or contaminated surfaces.
What You Will Receive
- One complete hood dual-stripe section
- One complete roof dual-stripe section
- One complete tailgate dual-stripe section
- One complete bumper dual-stripe section
- Two 8-inch primary stripes throughout each section
- Matching outer accent pinstripes throughout each section
- Your selected automotive-wrap vinyl color and finish
- Oversized material for final positioning and trimming
Vehicle, installation tools and professional installation are not included.
Automotive Vinyl & Paint Notice
Professional automotive-wrap vinyl is designed to provide removable vehicle
styling when it is installed and removed correctly from sound, properly cured
factory paint. However, no adhesive graphic can guarantee zero risk on every
vehicle or paint surface.
Additional care is required on repainted panels, bodywork, failing clear coat,
peeling paint, rust, rock chips, aged paint or surfaces with unknown repair
history. Existing paint defects may become visible or worsen during installation
or future removal.
Professional Removal Recommended
When it is time to remove or replace the stripes, use proper automotive-wrap
removal methods or have the film removed by an experienced professional.
Never pull cold, aged vinyl aggressively from an unknown or compromised paint surface.
Made to Order in Riverside, California
Professional Material
Produced using automotive car-wrap vinyl with air-release adhesive.
Vehicle Styling Experience
Developed by a team experienced in automotive vinyl graphics and wraps.
Real Product Support
Ordering and installation guidance is available from our Riverside team.
Read Verified Customer Reviews
Full-Truck Attitude. Universal-Fit Flexibility.
Transform your Ford F-150 with a complete professional-grade dual racing-stripe
system developed for modern full-size trucks. Choose your vinyl color and finish,
then create a bold center-stripe appearance from the hood to the rear bumper.
Fitment and aftermarket product disclaimer: This is a universal
trim-to-fit automotive graphic. Vehicle configurations, panel dimensions, paint
condition and installed accessories vary. Test-fit every section before installation.
Final trimming is required. The vehicle shown in listing images is for product
appearance and placement reference only. Professional automotive-wrap vinyl is
intended for application to sound, properly cured factory paint. Premium Auto
Styling cannot guarantee compatibility with repainted, repaired, failing, peeling
or otherwise compromised surfaces. This product is produced by Premium Auto Styling
and is not manufactured, sponsored or endorsed by Ford Motor Company or Shelby
American, Inc. Ford, F-150, Shelby and related vehicle names and trademarks are
used solely to describe compatibility and styling inspiration.
