Pure-White LED Lighting Upgrade
2022–2026 Subaru WRX LED License Plate Bulbs – 5000K White
Replace the factory yellow license plate lights on your
2022–2026 Subaru WRX with a cleaner, brighter, modern
white appearance. This complete, vehicle-specific kit includes two
direct-replacement T10 LED bulbs that install into the factory license
plate light sockets—without cutting, splicing, or replacing the exterior
lamp housings.
Clean 5000K White
Modern pure-white illumination without an excessively blue appearance.
Complete Two-Bulb Kit
Includes both LED bulbs needed to upgrade the driver and passenger sides.
Direct Replacement
Installs into the factory T10 sockets with no wiring modifications.
Clean White Light for the VB-Generation WRX
The factory license plate bulbs produce a warm yellow light that can look
dated next to the sharp LED lighting and modern rear styling of the
VB-generation Subaru WRX.
These approximately 5000K LED bulbs produce crisp, balanced white light
around the license plate. The result is a cleaner nighttime appearance
that complements the WRX without looking excessively bright, blue, or
overly aftermarket.
Why Upgrade Your Factory License Plate Lights?
-
Modern 5000K white output: Replaces the dated yellow
appearance of the factory halogen bulbs.
-
Vehicle-specific application: Selected specifically
for the 2022–2026 Subaru WRX.
-
Direct bulb replacement: Installs into the factory T10
license plate light sockets.
-
No wiring modifications: No cutting, splicing, or
permanent vehicle modification is required.
-
Complete pair: Includes two LED bulbs to upgrade both
factory license plate lights.
-
Clean OEM-style appearance: Enhances the rear of the
WRX without producing an excessively blue color.
-
Factory housings retained: The original lamp housings,
sockets, wiring, and mounting hardware are reused.
Product Specifications
Vehicle
Subaru WRX
Model Years
2022, 2023, 2024, 2025 and 2026
Chassis Generation
VB-generation Subaru WRX
Bulb Size
T10 LED
Light Color
Pure white
Color Temperature
Approximately 5000K
Installation Location
Rear license plate lights
Quantity
Two LED bulbs
Electrical Connection
Factory T10 bulb sockets
Modification Required
None
What You Will Receive
- Two approximately 5000K pure-white T10 LED bulbs
- Complete bulb replacement set for both license plate lights
- Installation guidance for the 2022–2026 Subaru WRX
Factory lamp housings, sockets, wiring, trunk-liner clips, tools, and
replacement mounting hardware are not included.
Vehicle Fitment
2022 Subaru WRX
2023 Subaru WRX
2024 Subaru WRX
2025 Subaru WRX
2026 Subaru WRX
VB Chassis
Installation location: Factory rear license plate light
sockets located within the trunk lid.
Designed specifically for the 2022–2026 Subaru WRX.
Owners of earlier-generation WRX models should select the separate
product listing corresponding with their model year.
Verify the Factory Lighting Configuration
Confirm that your vehicle retains its factory-style license plate lamp
housings and T10 bulb sockets. Aftermarket lighting assemblies may use
a different bulb, connector, or installation procedure.
2022–2026 Subaru WRX LED Bulb Installation Guide
The license plate bulbs are accessed from inside the trunk lid. Because
this kit replaces only the factory bulbs, you do not need to remove the
exterior trunk garnish or replace the complete lamp housings.
Recommended Installation Tools
Protect the Factory Trim
Use a plastic automotive trim tool instead of a metal screwdriver to
reduce the risk of scratching the trunk liner, painted surfaces, or
surrounding trim.
Before You Begin
Park the vehicle on a level surface, apply the parking brake, switch off
the ignition and all exterior lights, and open the trunk. Allow the
factory bulbs to cool completely before handling them.
Step-by-Step Installation Instructions
-
Remove the trunk-lid liner clips.
Locate the plastic retaining clips securing the liner to the inside of
the trunk lid. The liner is typically held in place by nine clips:
four on each side and one near the center. Carefully release each clip
using a plastic trim-removal tool.
-
Lower the trunk-lid liner.
Carefully lower or pull back the liner until you can access the rear of
the two factory license plate light sockets. Only create enough
clearance to reach the sockets; avoid sharply bending or creasing the
liner.
-
Locate the license plate bulb sockets.
Find the two factory bulb sockets positioned behind the center trunk
garnish and directly above the exterior license plate area.
-
Remove the first bulb socket.
Grip the socket—not the electrical wires—and rotate it to the unlocked
position. Carefully pull the socket out of the lamp housing.
-
Remove the factory T10 bulb.
Grip the original halogen bulb and pull it straight out of the socket.
If the bulb remains warm, allow it to cool before removal.
-
Install the new T10 LED bulb.
Insert one Premium Auto Styling T10 LED bulb firmly into the factory
socket. Make sure the bulb is straight and completely seated before
testing it.
-
Test the LED bulb.
Turn on the vehicle’s parking lights and verify that the new LED
illuminates. If it does not turn on, switch the lights off, remove the
bulb, rotate it 180 degrees, and reinstall it. LED bulbs may be
polarity-sensitive.
-
Reinstall the bulb socket.
Insert the socket into the factory lamp housing and rotate it into the
locked position. Confirm that it is properly seated and secure.
-
Repeat the process on the opposite side.
Follow the same socket removal, LED installation, polarity testing,
and reassembly procedure for the second license plate light.
-
Complete the final inspection and reassembly.
Turn on the parking lights and verify that both LEDs illuminate evenly
without flickering. Return the trunk-lid liner to its original position,
align the retaining clips with their mounting holes, and carefully
press each clip back into place. Confirm that the liner is secure and
no wiring has been pinched before closing the trunk.
Installation Tips
- Test both LED bulbs before reinstalling the trunk-lid liner.
- Grip the bulb socket itself—never pull on the electrical wires.
- Keep all removed retaining clips together during installation.
- Do not force a bulb or socket that is not correctly aligned.
-
If an LED does not illuminate, switch the lights off, rotate the bulb
180 degrees, and test it again.
-
Verify that both sockets are fully locked into the factory housings.
-
Confirm that neither bulb flickers and that both sides produce even
illumination.
-
Check that no electrical wiring is trapped beneath the trunk liner
during reassembly.
Frequently Asked Questions
Does this kit replace the complete license plate light housings?
No. This kit includes two replacement T10 LED bulbs. The factory lamp
housings, bulb sockets, wiring, and mounting hardware are reused.
What color are the LED license plate bulbs?
The bulbs produce approximately 5000K pure-white light, creating a
clean appearance without an excessively blue tint.
Are any wiring modifications required?
No. Cutting and splicing are not required. The LED bulbs install
directly into the factory T10 bulb sockets.
Why is my LED bulb not turning on?
T10 LED bulbs may be polarity-sensitive. Switch the exterior lights
off, remove the bulb, rotate it 180 degrees, reinstall it, and test
the light again.
Do I need to remove the exterior trunk garnish?
No. The factory bulb sockets are accessed from inside the trunk lid
after carefully lowering the interior trunk-lid liner.
Does this product fit earlier Subaru WRX models?
This listing is specifically intended for the 2022–2026 Subaru WRX.
Owners of earlier-generation vehicles should select the product
listing designated for their specific model year.
A Cleaner Nighttime Look for Your WRX
Upgrade both factory license plate bulbs with crisp 5000K white LED
illumination. Prefer to have our team complete the installation?
Professional installation is available at
Premium Auto Styling in Riverside, California.
Contact us before visiting to confirm scheduling and availability.
Fitment and installation disclaimer: This product includes
two replacement LED bulbs only. Factory lamp housings, sockets, wiring,
mounting hardware, trunk-liner clips, and tools are not included. These
instructions are provided as a general installation guide for compatible
2022–2026 Subaru WRX models equipped with factory-style license plate lamp
housings and T10 bulb sockets. Vehicle configurations, aftermarket parts,
and previous modifications may affect compatibility or installation.
Always switch the ignition and exterior lighting off before removing or
installing electrical components. Premium Auto Styling is not affiliated
with, sponsored by, or endorsed by Subaru Corporation. Subaru, WRX, and
related names and trademarks are used solely to describe product
compatibility.
