Have questions?
Designed and tested in-house
We know our products
DIY friendly installation
Free USA Shipping over $49
Accent your front end fog bezel area with this precut pinstripe giving it that extra flare you want! Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.
This product is meant for the following front bumpers ONLY:
2020 Si Sedan
2020 Si Coupe
2020 Hatchback
2020 Type R
TOOLS REQUIRED: PRO FELT SQUEEGEE, WRAP BLADE, HEAT GUN or Warm Sunny Day to Post Heat the product
This product is made with wrap vinyl, not sticker vinyl, which is why it is a DRY install! NOT A WET INSTALL.
DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
FULL INSTALL: After the surface is clean and you have read and completed "DRY INSTALL BASICS" Start by peeling the vinyl from the backing paper while making sure not to stretch the product.
Place the upper corner and follow along the front edge of the fog bezel accent piece and the overlay will fall into place.
Depending on how you handle the product, you may end up stretching the vinyl and end up with excess near the front tip of the fog bezel accent piece. If this occurs simply place the vinyl, and after squeegeeing down the vinyl overlay completely, use a sharp wrap blade and trim the excess.
• Includes driver and passenger side overlays ( total pieces included is 2).
• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.
• Car wash safe.
• Can be removed without any damage to surface.
• 1-3 year life expectancy.
• Check your local laws and regulations
Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.
