2015–2017 WRX/STI for the 2015–2017 Subaru WRX/STI
2015–2017 WRX/STI for the 2015–2017 Subaru WRX/STI, from Premium Auto Styling in 2018–2021 WRX/Premium Headlight Amber Delete W/ Eyelid Overlay | Carbon Fiber. Templated, Created, tested and verified fitment at our Riverside, CA location.
2015–2017 WRX/STIPre-cut and ready to apply.
Made for the Subaru WRX/STIMatches the configuration in the listing photos.
Durable VinylWeather-resistant for long-term use.
2015–2017 WRX/STI, Built for the Subaru WRX/STI
The overlays are precision cut from a durable automotive grade vinyl for an aggressive styling that’s sure to look good on any color Subaru!
Installation of this product takes roughly 20 minutes to complete the entire project.
QUICK INSTALL GUIDE: Getting the vinyl installed on your ride is very easy and only requires a spray bottle filled with a little soap and water to clean the light, and a felt edge squeegee and a blade for application and excess trimming you may have depending on your placement
To line up your overlay, start with the side of your light facing towards the rear of the car
Lining this side up will help you align and place the rest of the overlay
Driver and passenger side pieces included
Pre-cut for the 2015–2017 Subaru WRX/STI
Durable, weather-resistant vinyl
What You Will Receive
2015–2017 WRX/STI for the 2015–2017 Subaru WRX/STI, 2018–2021 WRX/Premium Headlight Amber Delete W/ Eyelid Overlay | Carbon Fiber
Vehicle parts and installation tools are not included. This listing is for the product shown only.
Vehicle Fitment
Designed for: 2015, 2016, and 2017 Subaru WRX/STI models matching the configuration shown in the product images.
Compare your vehicle with the listing photos before ordering. Aftermarket or modified panels and lamp assemblies may differ from the intended application.
Check the Photos First
Compare your vehicle against the listing photos before ordering. If your vehicle has aftermarket or modified panels, trim, or lamp assemblies, fitment can differ from the factory application.
Installation Overview
Clean the headlight.
Wash the headlight and wipe the application area with isopropyl alcohol to remove dirt, oil, and wax. Allow it to dry completely.
Spray and position.
Lightly spray the surface and the adhesive side of the overlay with water and a few drops of soap, or an application solution. Set the overlay in place and reposition until it aligns.
Squeegee smooth.
Working from the center outward, squeegee out the water and air bubbles for a flat, even finish.
Dry and cure.
Allow the film to dry and adhere fully before washing the vehicle.
Frequently Asked Questions
Does this fit my Subaru WRX/STI?
This product is designed for the 2015–2017 Subaru WRX/STI. Compare your vehicle with the listing photos before ordering, and contact us with your year and trim if you are unsure.
Can it be removed later?
Yes. It can be removed without permanent modification. Heat and a slow peel help release the adhesive on vinyl and film products.
What do I need to install it?
Basic tools: isopropyl alcohol and a microfiber for prep, and a squeegee for application. See the installation overview above for the full process.
Premium Auto Styling Support
Have questions about fitment or installation? Contact the Premium Auto Styling team in Riverside, California, for product guidance and professional installation options.
Order the 2015–2017 wrx/sti for your 2015–2017 Subaru WRX/STI, made in Riverside, California.
Aftermarket styling and fitment notice: Confirm the matching factory configuration before purchase. Damaged, refinished, or deteriorated surfaces may be affected during application or removal. Subaru names and model names describe compatibility. Premium Auto Styling is not affiliated with or endorsed by Subaru.