Enhance your vehicle’s lighting with our premium amber tint film, designed for headlights, fog lights, and tail lights. This adhesive-backed film applies directly to the lens and delivers a high-gloss, consistent amber finish built to last. When gently heated, the material becomes flexible and conformable, allowing it to stretch and mold around most compound curves for a smooth, professional result.
Ideal for motorsport-inspired styling, off-road builds, or subtle OEM+ upgrades, this amber film delivers bold color at an affordable price point.
• 2–5 year outdoor durability
• High-gloss, consistent amber finish
• Will not crack, chip, or peel when properly installed
• Removable (film cannot be reinstalled once removed)
• Automotive-grade adhesive backing
• Maintenance-free and car wash safe
• Designed for wet installation
This film is designed for wet installation, allowing easier positioning and reduced risk of air bubbles.
• Thoroughly clean and degrease the lens before installation
• Use a slip solution (water with a few drops of baby shampoo or dish soap)
• Lightly mist both the lens and adhesive side of the film
• Position the film and squeegee from the center outward using a felt-edge squeegee
• Apply controlled heat to conform around curves
• Post-heat edges to ensure proper adhesion
A felt-edge squeegee is highly recommended to prevent scratching and achieve the best results. Allow 24–48 hours for full adhesion before washing or exposing to heavy moisture.
$132.00