Rear Reflector Overlays (2013 -2018 Fiesta ST)

Give the rear end of your Fiesta ST a cleaner, more aggressive look with a simple OEM+ upgrade. Our Rear Bumper Reflector Overlays are precision cut from Oracal 8300 smoke tint film for a sleek smoked finish while still allowing reflector visibility through the material.

Install Time: ~10–15 minutes
Install Type: Wet Install (recommended)

✅ What’s Included

• (2) Rear bumper reflector overlays (Driver + Passenger side)
• FREE squeegee included

✅ Full Coverage Fit (IMPORTANT)
To ensure a clean final look, these overlays are intentionally cut slightly oversized along the top & bottom edges. This allows for minor variations in reflector shape and placement during installation.

For the best appearance, edges may need to be tucked and/or lightly trimmed once the film is positioned.

🔥 Quick Install Guide (Wet Install)
You’ll need:

• Spray bottle with water + 1 drop of Dawn Blue dish soap
• Included squeegee
• Optional: sunlight or heat gun (low heat) to help curing

Steps:

1. Clean the reflector thoroughly (wash, then alcohol wipe)
2. Spray the reflector and adhesive side of the film lightly
3. Position the overlay and align it evenly
4. Use the squeegee to push out all water/bubbles from the center outward
5. Apply firm pressure to lock edges down
6. Let cure in the sun for a few hours (or use low heat carefully)

Important: Avoid stretching the film during install — stretching can distort the shape and affect fitment.

💡 Pro Tip
After installation, allow the film to fully dry/cure before washing the vehicle. For best edge hold, avoid pressure washing directly on the reflectors for 24–48 hours.

✅ Features & Specs

• Smoked tint finish (Oracal 8300)
• 2-piece kit (Driver + Passenger)
• Allows reflector visibility through film
• Wet install application
• Durable automotive-grade tint film
• Car wash safe after proper cure
• Removes clean with no damage
• 5–7 year outdoor life expectancy