Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Headlight Amber Delete Overlay - Smoke Tint | 2019-2022 Toyota Corolla Hatchback

$19.99
SKU: A-168--SMK
Shipping: Calculated at Checkout
Adding to cart… The item has been added

2019-2022 Toyota Corolla Hatchback | Headlight Amber Delete - Smoke Tint

Making your Corolla stand out from the crowd just got a little easier with this simple yet subtle DIY install product. This Pre-Cut Vinyl piece is made specifically to fit your headlight and give it a new OEM+ look. This specific product is smoke tint but it is also available in gloss black vinyl giving you a bolder more aggressive look. Premium Auto Styling brings you yet another inexpensive way to customize your vehicle. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HEREYou'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). 

INSTALL GUIDE: After you have read and completed "WET INSTALL BASICS" continue with the following.

Let's begin, You’ll first want to mist the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle's headlight. The corner of the overlay should sit just above the amber reflector in the headlight, while also lining up with the bottom edge from the side of the headlight on the side all the way to the front. Once the overlay is set in place, start from the center with firm pressure using a squeegee, and begin pushing the air from beneath the overlay toward the edges. A heatgun is recommended to conform the edges of the overlay. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, another option would be to use a heat gun to speed up the post heating/drying process. If placed correctly no trimming should be required. This product was designed to fit without alteration.

 

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

 

DIFFICULTY RATING 2/5

difficulty-rating-2-out-of-5-squeegees-premium-auto-styling.jpg

MORE >> Difficulty Rating Information

 

Customers Also Viewed