2018-2019 Tesla Model 3
Premium Auto Styling brings you a way to protect your Model 3 , thanks to our center console overlays. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay. We know the console already comes with Piano Black but in order to protect the paint without having to have someone else install PPF for you.
Note: THIS IS NOT A FULL COVERAGE PRODUCT. WE DESIGNED THE OVERLAY IN SUCH A WAY THAT IT DID NOT NEED TO BE MOLDED INTO THE INNER EDGES OF THE CUP HOLDER. INSTEAD IT SITS ON THE OUTSIDE EDGE BUT STILL KEEPS A CLEAN FINISHED LOOK.
>> SET INCLUDES : Top, Middle And Bottom Cupholder section
INSTALL GUIDE
PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED FOR PPF PRODUCTS.
WET INSTALLATION: Getting the PPF installed on your vehicle requires minimal tools.
Tools Needed:
- Hard Squeegee (you can use a room key card or credit card in a pinch)
- Premium Surface Lube (you can make your own by filling a spray bottle with 16 oz of water and 1 drop of dish soap)
- Blade (only necessary for overlays that have extra material that needs to be trimmed)
For Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE).
Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).
To begin, you first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - you may need a heat gun to help conform the material to aggressive bends and or corners.
>> DISCLAIMER INFORMATION
SUPERIOR QUALITY
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 3-6 year life expectancy.
DIFFICULTY RATING 4/5
Difficulty Rating of 4 is used when you definitely need time and patience to install this product. It would be very helpful to have experience installing vinyl or tint. but it is absolutely doable. (APPRENTICE INSTALLER STATUS)
MORE >> Difficulty Rating Information
