2008-2014 SUBARU WRX/STI HATCHBACK

Premium Auto Styling brings you yet another inexpensive way to customize and protect your WRX/STI, thanks to our Red Tail Light Overlays. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This product covers only the clear part of your tail light making installation very easy. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout our Pre-Cut Tail Light Tint Overlays.  

>> SOLD AS A SET :  THIS KIT INCLUDES DRIVER AND PASSENGER SIDE

INSTALL GUIDE 

WET INSTALL: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and sometimes a blade and or heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges - sometimes a heat gun will be needed to help conform the material to aggressive bends and or corners. TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, if you would like you can use a heat gun to speed up the drying process.  

SUPERIOR QUALITY  

• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy.  

COLORS  

• Red Tint   

>> DISCLAIMER INFORMATION  

DIFFICULTY RATING 5/5

MORE >> Difficulty Rating Information