Tesla Model 3 Quarter Window Decals - Model 3 Logo (Set of 2)
Elevate your Tesla Model 3's style with our precision-cut Quarter Window Decals featuring the Model 3 logo. This premium set includes two decals, one for each side, ensuring a symmetrical and polished look that complements your vehicle's aesthetic.
Features:
- Custom Design: Made exclusively for Tesla Model 3.
- High-Quality Materials: Crafted from durable, weather-resistant vinyl for long-lasting performance.
- Easy Application: Comes with pre-applied transfer tape for a smooth, bubble-free installation.
- Stylish Finish: Enhances the visual appeal of your Tesla while maintaining its elegant look.
- Removable: Can be removed without damaging your car's surface.
Colors Available:
- Satin Black
- Satin Dark Gray
Product Includes:
- Two Tesla Model 3 Quarter Window Decals (Model 3 Logo) – one for each side
- Installation instructions
Installation Instructions:
- Clean the Surface: Thoroughly clean and dry the quarter window surface to ensure no dust, dirt, or residue.
- Position the Decal: Align the decal on the window to determine the ideal placement before removing the backing.
- Peel the Backing: Carefully peel off the backing paper to expose the adhesive side of the decal.
- Apply the Decal: Place the decal onto the window, starting from one side and smoothing it down with a squeegee or credit card to avoid air bubbles.
- Remove the Transfer Tape: Gently peel off the transfer tape, ensuring the decal remains in place.
- Final Touches: Smooth out any remaining air bubbles by pressing firmly with the squeegee or card.
Cold Weather Installation Tips:
- Ensure the surface temperature is above 70°F (21°C) for optimal adhesion. If it's colder, warm the window surface with a hairdryer or heat gun on a low setting before applying the decal.
- Keep the decal warm before application by storing it indoors or warming it gently with a hairdryer.
- Work in a sheltered area to protect the decal from cold wind and moisture during installation.
- After applying the decal, use a hairdryer or heat gun on a low setting to gently heat the surface, then press firmly to secure the edges.
