2017+ Tesla Model 3 / 2020 Tesla Model Y | Charge Port Wrap Kit
Premium Auto Styling brings you yet another inexpensive way to customize your Model 3 & Model Y , thanks to our charging port vinyl. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.
DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. What you'll need: A squeegee is all that is needed for this instal. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to start by positioning the vinyl into place on your vehicle. Simply center the overlay on the handle by lining up the back corner first. If alignment is not right the first time, pick the vinyl back up carefully and try again. Once you are happy with placement move onto laying the vinyl. Using your fingers or a squeegee lay the face of the vinyl onto the handle applying even pressure throughout. Starting from the center pushing all the air out from underneath towards the edges. To tuck the excess material around the edges you will need to use the heat gun to heat the vinyl and mold it around the edges. Once completed run your pro felt squeegee along the edges to insure everything is laid properly. Repeat this process for the remaining 3 door handles and you are done.
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
• Textured Carbon Fiber High Performance Wrap Film
DIFFICULTY RATING 3/5
MORE >> Difficulty Rating Information