null

Select your vehicle

JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback

SKU:
HL111-YLT.
Shipping:
Calculated at Checkout
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
  • JDM Yellow Headlight DRL Tint Overlay | 2016-2020 Honda Civic Hatchback
$18.99
  • PREMIUM PRO FELT SQUEEGEE

Description

2016-2020 Honda Civic Sedan - JDM Yellow Headlight DRL Tint Overlay

Get the JDM look without the hassle of a full retrofit that would otherwise require opening up the headlight. This solution makes it so you don't have to open up the headlight and is so easy to install you don't need any previous tint overlay experience. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay. 

NOTE: THIS PRODUCT IS MADE SPECIFICALLY FOR THE STOCK OEM HALOGEN HEADLIGHTS ONLY ON THE 2016-2020 MODEL! IT IS NOT MADE FOR ANY AFTER MARKET HEADLIGHT, TYPE R HEADLIGHT, OR UPGRADED LED VERSION OF THE STOCK HEADLIGHT BECAUSE THE HEADLIGHT DRL IS DIFFERENT.

INSTALL GUIDE 

TOOLS REQUIRED:

PRO FELT SQUEEGEE

HEAT GUN or Warm Sunny Day to Post Heat the product

INSTALLATION:

This product is a WET INSTALL PRODUCT. Getting the vinyl installed on your ride is very easy and only requires minimal tools. First you need: lubrication spray solution.  You can make a lubrication spray solution at home by using a spray bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).

After the surface is clean and you have read and completed "WET INSTALL BASICS" Start by misting the surface you will be applying the overlay to, then do the same for the adhesive side of the overlay after you have gently peeled the tint from the backing paper.

Start at the bottom front edge where the bulge in the headlight is. You will notice a small indentation in the overlay, this is to mark the corner of the bulge, place the overlay so it lines up in that area, and the rest will fall into place. 

Make sure your outer edge falls along the outer bottom edge of the headlight. Once you are happy with placement. Use firm pressure with a pro felt squeegee starting from the center of the overlay and push out all the moisture and air out from underneath the tint.

Once completely laid, go back over the entire overlay squeegeeing it down again, making sure there is no air left under the vinyl.  Once happy with your final result, post heat the overlay with a heat gun, or let the vehicle sit in the sun for a couple hours and the install is complete.

SUPERIOR QUALITY 

• Includes driver and passenger side overlays ( total pieces included is 2). 

• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal. 

• Car wash safe.  

• Can be removed without any damage to surface.  

• 1-3 year life expectancy.  

• Check your local laws and regulations  

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING 2/5 

Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.

 

View AllClose