Description

2018-2021 Nissan GTR | Grille Accent Overlay

Making your GTR stand out from the crowd just got a little easier with this simple yet subtle DIY install product. This Pre-Cut Vinyl piece is made specifically to fit over your stock Grille and give it a new OEM+ look. This specific product is gloss RED but it is also available in many other colors and finishes. Premium Auto Styling brings you yet another inexpensive way to customize your vehicle. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE

This product is a DRY install made with Air Release film

DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F).

INSTALL GUIDE: After you have read and completed "DRY INSTALL BASICS" continue with the following.

Let's begin, You’ll first want to position the vinyl into place on your vehicle's grille. Start by aligning the overlay to the top corners. Make sure you place the overlay so that the bottom edge falls right on the outer bottom edge of the grille. This product was designed to fit without alteration.