Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Front Side Marker Reflector Vinyl Overlays - Smoked Tint | 2020-2023 Toyota GR Supra

SKU: R 135 - LUX
Shipping: Calculated at Checkout
Adding to cart… The item has been added

2020-2023 Toyota GR Supra - Front Side Marker Reflector Overlays

The Supra is sleek, so why ruin it with a bright orange reflector on the side of the bumper. If you want to change up the rear end and achieve a different but still oem look, the pre-cut rear reflector tint we've developed is a great way to do just that. This tint simply darkens up the rear end while still providing the normal reflection capabilities the reflector is meant to have. This is a pre-cut piece of smoke tint that is made specifically for this make and model. Made to fit without any trimming required depending on your placement. Follow our install guide in the description for the best end result. This is an easy peal and stick tint accent overlay. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.  Check your local laws and regulations prior to purchasing. Disclaimer information attached below.



DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

FULL INSTALL: After the surface is clean and you have read and completed DRY INSTALL BASICS, line up the top of the overlay with the top of the reflector, then slowly lay it into place following the lines of the reflector. Before pressing it down, check to make sure your alignment of the product is correct, make placement adjustments if necessary. Then, using a squeegee, start from the center of the overlay and apply firm pressure moving outwards. Continue with the squeegee until all air from underneath the vinyl is removed. No trimming should be required if placed properly. 


• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 


• Mid-Smoke Tint




MORE >> Difficulty Rating Information



Customers Also Viewed