Have questions?
Designed and tested in-house
We know our products
DIY friendly installation
Free USA Shipping over $49
Wing End Plate With R Logo Cut Out: Premium Auto Styling overlays add great styling for a low price! The overlays are precision cut from a durable vinyl for a perfect fit and aggressive styling that’s sure to look good on any Honda Civic Type R! Made from quality automotive vinyl. Application takes roughly 15 minutes to complete the entire project.
QUICK INSTALL GUIDE: Getting the vinyl installed on your ride is very easy and only requires a squeegee. We recommend the Pro Felt Squeegee if anything for this install but you really just need your hands! First position it into place on the end plates of your spoiler. By following the body line that exists make sure you look at each corner for reference. It's easiest to work from the top first then gradually move down and lay the vinyl into the recess where the end plate starts to bend outwards towards the bottom. You'll want to then lay that material into place before removing the transfer tape that is holding the cut out together. This is in place to ensure that the logo cut out doesn't get warped during the install process. Use that squeegee or your fingers to push out and remove any excess air bubbles from underneath the vinyl. This entire process should take you about 15 minutes to complete.
This install is a 3 out 5 in Difficulty.
Difficulty Rating of 1 is used for overlays that are easy for everyone including first time DIYers. (PIECE OF CAKE)
Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TOO HARD AT ALL REALLY)
FEATURES & SPECIFICATIONS
Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling
