2016-2018 Honda Pilot. These vinyl overlays overlays are made from thick, strong automotive grade vinyl film. Great styling addition to your Pilot!
QUICK INSTALL GUIDE: Getting the vinyl installed on your Pilot is very easy and only requires a felt edge squeegee. This overlay was designed to practically fall into place with very minimal positioning effort. Before you begin installing any vinyl overlays make sure your vehicle is cool to the touch - early morning before driving is a perfect time to apply our vinyls. You’ll first want to clean the surface by wiping the area with isopropyl alcohol, Once the surface is clean you are ready for install. Start by positioning the overlay into place following the body lines. This overlay specifically is easiest to start with the outside corner of the taillight that faces the front of the vehicle. Set the corner in place and lining up the rest should fall into place. Using your finger or felt edge squeegee start from the center of the overlay and push the air out from underneath the vinyl toward the edges. Lastly, remove any excess bubbles then leave your car in the sun for 30 minutes just to let everything settle. This entire process should take you no more than 20 minutes to complete. DO NOT INSTALL THE VINYL IN DIRECT SUNLIGHT OR IN HIGH TEMPERATURE AREA.
FEATURES
- Adhesive backed film for easy installation and removal.
- Reduces appearance of existing cracks and scratches.
- Maintenance free & car wash safe.
- Can be removed without any damage to lights.
- 5-7 year outdoor life expectancy.
