Tail Light Deck Vinyl Overlay: Premium Auto Styling overlays add great styling for a low price! The overlays are precision cut from a durable vinyl for a perfect fit and aggressive styling that’s sure to look good on your vehicle! Made from quality automotive vinyl. This product covers, and protects the tail light while also giving it a completely new look. The top of these tail light lenses are often sun damaged more than most because there is more surface area for the sun to hit, because of this we have developed the Tail Light Deck Vinyl Overlay to prevent this sun damage from happening, or if it already has to cover the light itself.

NOTE: THIS PRODUCT IS MADE SPECIFICALLY FOR THE STOCK OEM TAIL LIGHTS ONLY! IT IS NOT MADE FOR ANY AFTER MARKET TAIL LIGHT, THE ALIGNMENT OF THE SIDE FIN OF THIS OVERLAY IS NOT THE SAME AND WILL NOT WORK.

QUICK INSTALL GUIDE: Getting the vinyl installed on your ride is very easy and only requires a squeegee. We recommend the Pro Felt Squeegee, and a sharp blade for this install. First clean the surface of the tail light, position the overlay on the tail light. Use a squeegee to push out and remove any excess air bubbles from underneath the vinyl. This entire process should take you about 5-10 minutes to complete one side.

FULL INSTALLATION GUIDE: After cleaning the surface of the tail light, make sure you do not have any debris on the surface as it will show in the product. Start by peeling the vinyl from the backing paper while making sure not to stretch the cut-out area for the side fin. Hold the overlay by the edges nearest to the cut-out while letting your top and bottom section fall freely. With your fingers, lay the edge of the vinyl around the fin only. Make sure everything in that area is laid before continuing. This area is your hinge point and will dictate how the rest of the overlay falls into place. Keep the top of the overlay off of the light as you gradually lay it in place starting from your hinge, then moving to the inner corner of the tail light nearest to the trunk. Then move to the remaining bottom side and lay the material down as you apply pressure with a squeegee in the same way you did the top side. Trim any excess you might have and the install is complete.

INSTALLATION DIFFICULTY: 3 out of 5  ( Installation itself is a 2, but because you need to be very patient with initial alignment we have deemed this install a 3. )

• Includes driver and passenger side overlays (total pieces included is 2)
  
• Adhesive backed film for easy installation and removal. 
• Reduces appearance of existing cracks and scratches. 
• Maintenance free & car wash safe. 
• Can be removed without any damage to lights. 
• 1-3 year outdoor life expectancy. 

Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.