Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Tail Light Custom Black Out Accent - Gloss Black | 2015-2019 Honda Fit Sport

$24.99
SKU: T-159-GB
Shipping: Calculated at Checkout
Adding to cart… The item has been added

2015-2019 Honda Fit 

Premium Auto Styling brings you yet another inexpensive way to customize your vehicle , thanks to our hood scoop inlay. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

Step 1 | DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). 

FULL INSTALL:

After you have finished with step 1 mentioned above you can continue here. These instructions utilize a diagram in the product shot section of this page. Refer to it along with the instructions described below. Some trimming may be required depending on your placement. A sharp blade is recommended. Start by lining up corner (1) and (2) to the tail light. Check to make sure corner (4) reaches all the way to the inner edge of (A). Adjust until proper placement is achieved. Second piece, line up edge (B) with edge (B) from the first piece. Line up top of edge (B) to corner (3) of the first piece. Everything else will fall into place from there. Squeegee out remaining air. Tuck edges with squeegee. Trim any excess. Install Complete.

 

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

 

DIFFICULTY RATING 3/5

difficulty-rating-3-out-of-5-squeegees-premium-auto-styling.jpg

MORE >> Difficulty Rating Information

 

Customers Also Viewed