Have questions?
Designed and tested in-house
We know our products
DIY friendly installation
Free USA Shipping over $49
Looking for a very different look than most stingers? You can black out the center portion of the tail light cross beam with this pre-cut multi piece kit. Made to make the project easier than a single piece with multiple recesses. Also why we have created a full installation process to assist you. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, this is a very easy way to do it without needing professional help. Note: This is not a complete coverage product of the entire center of the tail light as shown in the highlighted product photo.
TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN OR SUNNY DAY FOR POST HEAT PROCESS
DRY INSTALL: Getting the tint installed on your Stinger just got easier with our special high grade tint material made to be a dry install instead of a wet install like other products. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
NEXT after making sure your tail light is clear of debris and any moisture, remember this is a dry install not a wet install.
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
MORE >> Difficulty Rating Information
