Third Brake Light Smoke Tint Overlays | 2018-2023 Ford Mustang

Why the third brake light comes stock as clear, ruining the look of the rear end, we may never know, thankfully there's an extremely easy fix for that. Pre-cut tint overlay fits directly onto the third brake light without any trimming required. Simple Peel and Stick Wet install process is explained in our install guide in the description. These unique tint overlays have been pre-cut for easy DIY installation and are made with quality automotive grade vinyl. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.  

INSTALL GUIDE: 

TOOLS REQUIRED: ***PRO FELT SQUEEGEE, and HEAT GUN or Warm Sunny Day to Post Heat the product

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). 

CONTINUED: After the surface is clean and you have read and completed "WET INSTALL BASICS" remove tint from backing paper, carefully making sure it does not stick to itself. Lightly mist the surface you will be applying the product to, as well as the adhesive side of the tint. Start on one side, line up the corner of the tint overlay, make sure the top edge is aligned properly, then move to the other side and line up the opposite corner. Once placement is confirmed, using a squeegee, start in the center of the overlay with firm pressure and work your way out to the sides removing any and all air and moisture from underneath the tint film. Post heat the product using a heat gun and the install is complete.

FEATURES & SPECIFICATIONS

• Smoked appearance
• Durable vinyl tint
• Fits all 2018-2023 Ford Mustang
  
• Adhesive backed film for easy installation and removal. 
• Reduces appearance of existing cracks and scratches. 
• Maintenance free & car wash safe. 
• Can be removed without any damage to lights. 
• 2-5 year outdoor life expectancy. 

DIFFICULTY RATING 1/5