2020 Chevrolet Silverado - Tail Light Reverse Light Tint Overlay

If you simply want to darken up that glaring clear portion of your tail light without drastically sacrificing its light output, this smoke tint overlay is perfect for just that. Simple peel and stick automotive grade tint film, pre-cut to make the install extremely easy. This install should take no longer than five minutes. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). 

INSTALL GUIDE: After you have read and completed "WET INSTALL BASICS" continue with the following. This is one of the easiest overlay installs we offer.

Let's begin, You’ll first want to mist the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle's tail light. Start with the rear facing side of the tail light, not the side. Align the top and bottom corner of the overlay to the clear portion of the tail light. Once placed, the side of the overlay simply falls down into place. Once the overlay is set in place, start from the center with firm pressure using a squeegee, and begin pushing the air and water from beneath the overlay toward the edges. Once you've completed the install we recommend that you leave your vehicle in the sun for up to 30 minutes to an hour just to let everything dry, another option would be to use a heat gun to speed up the post heating/drying process. This product was designed to fit without alteration.

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING 1/5

MORE >> Difficulty Rating Information