2017-2019 Kia Sportage

If you want to really change up the look of the rear end of your Sportage and give it a more expensive and aggressive look, smoking out the huge reflectors on this vehicle is the easiest way to do it. This overlay is pre-cut to make install DIY friendly. It does take some patience but if you utilize our install kit you can have this drastically different look in no time without even having to leave the garage. This product is made from automotive grade tint film and is pre-cut in house here in Riverside California specifically for the 2017-2019 Kia Sportage. We also have a variety of other products for this generation Sportage from front to back. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

WET INSTALL: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and sometimes a blade and or heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges. A heatgun is recommended to conform the edges of the overlay. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, another option would be to use a heat gun to speed up the drying process.  

This product does curve around a bend and may require some heat in order to install without wrinkles. Heat gun and squeegee recommended. Start by lining up the outer rounded corner first then continue with the standard wet install method.

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING 3/5

MORE >> Difficulty Rating Information