2015-2022 DODGE CHARGER | SMOKED FRONT SIDE REFLECTOR TINT OVERLAY

The stock front side reflectors are typically the first thing owners will change out, and one of the easiest things to install on the whole car. We've made a simple pre-cut kit for both sides making it extremely easy for even beginners to do. These unique Vinyl overlays have been pre-cut for easy DIY installation and are made with quality automotive grade vinyl. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.  

INSTALL GUIDE:

TOOLS REQUIRED: ***PRO FELT SQUEEGEE, and HEAT GUN or Warm Sunny Day to Post Heat the product

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). 

Getting the vinyl installed on your Charger is very easy and only requires a spray bottle filled with a little soap and water and a felt edge squeegee. You’ll first want to spray / mist the back side of the vinyl very lightly and then position the overlays into place on the side marker. Using a squeegee push out and remove any excess bubbles from underneath the vinyl - Apply heat to the film to help mold the film around bends and curves. Once completed leave your car in the sun for a few hours just to let everything dry, you can use a heat gun to speed up the drying process if you would like. This entire process should take you no more than 10 minutes to complete.

FEATURES & SPECIFICATIONS

• Smoked appearance
• Durable vinyl tint
• Allows reflector lights to shine through
• Includes driver and passenger side inserts (2 piece kit)
• Fits all 2015-2022 Dodge Charger // Charger Hellcat
  
• Adhesive backed film for easy installation and removal. 
• Reduces appearance of existing cracks and scratches. 
• Maintenance free & car wash safe. 
• Can be removed without any damage to lights. 
• 2-5 year outdoor life expectancy. 

>> DISCLAIMER INFORMATION  

DIFFICULTY RATING 2/5

MORE >> Difficulty Rating Information