Have questions?
Designed and tested in-house
We know our products
DIY friendly installation
Free USA Shipping over $49
Want to make your outback truly your own. This kit covers your existing Outback emblem face with any color of your choosing. Easy peel and stick process makes this modification easier than ever to customize your outback. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. If placed incorrectly some of the original emblem face may be visible.
**Image shows a standard Outback with silver OEM lettering. The Wilderness trim level has Orange OEM lettering so we choose colors that will complement this factory color**
DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in colder temperatures though which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
FULL INSTALL: After the surface is clean and you have read DRY INSTALL BASICS, start by peeling the first letter and placing it on your blade. Using your blade instead of your finger for placement gives you more visibility and a more stable tool that wont nudge your placement when installing. Line up the vinyl to the corresponding letter on the vehicle. Place and press down firmly. Continue these steps for each letter until both sides are completed.
• Product includes 1 outback lettering set for the passenger side, 1 outback lettering set for the driver side, and one extra set incase installation error occurs.
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
MORE >> Difficulty Rating Information
