2019-2020 Hyundai Elantra GT Hatchback (N-Line Only) | Rear Diffuser Pinstripe

Love your N-Line but wish it came with the classic red sporty styling options. This Pinstripe was developed specifically to bring that sporty red accent to your Elantra GT N-Line Hatch in a DIY friendly package. This pinstripe is slightly oversized so it can be tucked and trimmed into place giving you full coverage. This is a product we would typically make completely pre-cut, but because this diffuser has a complex bend that would otherwise throw off someone completely new to vinyl, we made it so you simply conform the strip to your diffuser. Your placement dictates the coverage. Again this product was created slightly oversized but you do need to have patience during this install in order to get the result you want. We took multiple pictures during this install to give you a better idea of what you can expect from an install for this product. Premium Auto Styling brings you yet another inexpensive way to customize your vehicle. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

Note: This is not a pre-cut kit. Trimming and tucking is required. This product is made as a bulk piece so you have excess on each end making it easier to conform to the curves of the piece on the vehicle that it is being applied to. This was necessary in order to achieve the completely covered end result rather than just a pinstripe that covers the front edge.

INSTALL GUIDE 

DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in colder temperatures though which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

FULL INSTALL: After the surface is clean and you have read DRY INSTALL BASICS, start by lining up the material in the center of the diffuser, making sure you have the same amount of pinstripe on each side so you do not come up short on either side. Line up the top edge of the pinstripe to the very edge of the top of the diffuser. Then work your way left (toward the driver side) all the way to the corner lining up the pinstripe to the top edge as you go. Then do the same to the right ( toward the passenger side) all while making sure not to stretch the material. If you stretch the material it is possible that you will end up short on the rear facing side. Once the top edge is completed, apply pressure to the bevelled edge that is the top edge of the rear facing side of the diffuser from left to right. Heat the rear facing side and the vinyl should fall into place. Squeegee the material into place, Trim out the left and right corners with a new sharp wrap blade. Post heat, by briefly heating the entire surface with a heat gun to make sure everything is set. That's it, Install Complete. 

SUPERIOR QUALITY 

• Product includes 1 extra pinstripe incase install error occurs on the first attempt

• Adhesive backed film for easy installation and removal.  

• Maintenance free & car wash safe. 

• Can be removed without any damage to surface. 

• 1-3 year life expectancy. 

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING 4/5

MORE >> Difficulty Rating Information