2022 SUBARU OUTBACK WILDERNESS | FOG LIGHT OVERLAYS - AMBER TINT
Premium Auto Styling brings you yet another way to customize and protect your Outback Wilderness Fog Lights. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. These Fog Light Overlays install on the face of the fog light (which is a flat surface for easy installation) and gives your fog lights a rally yellow look. Light output is minimally reduced and the color of the light output changes to yellow, but the look is awesome! Unlike most eBay or Amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results. Basically, if they don’t work on our cars, they’re not going to end up on yours.
WET INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools.
- Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch)
- Premium Surface Lube (you can make your own by filling a spray bottle with 16 oz of water and 1 drop of dish soap)
- Blade (only necessary for overlays that have extra material that needs to be trimmed)
- Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations)
For Best results, always clean the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). (Use at least 70% Isopropyl Alcohol to prep the surface after cleaning)
Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).
To begin, you first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - you may need a heat gun to help conform the material to aggressive bends and or corners.
TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required.
Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, if you would like you can use a heat gun to speed up the drying process.
FEATURES & SPECIFICATIONS
• Includes 2 pre-cut fog light overlays (2 piece kit) in AMBER Tint
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
• Amber Tint
This install is a 1.5 out 5 in Difficulty.
Difficulty Rating of 1 is used for overlays that are easy for everyone including first time DIYers. (PIECE OF CAKE)
Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TO HARD AT ALL REALLY)
Excited about your installed Product? Let us know! Take a picture, and tag us on Instagram! @premiumautostyling
Interested in a custom color or finish for this product. Contact our team at email@example.com and we can look into your request before you place your order.