Select your vehicle

"I Heart My" Crosstrek Mountain Range Decal - Gloss Black | 2018-2020 Subaru Crosstrek

SKU:
DCL021-GB
Shipping:
Calculated at Checkout
  • "I Heart My" Crosstrek Mountain Range Decal - Gloss Black | 2018-2020 Subaru Crosstrek
  • "I Heart My" Crosstrek Mountain Range Decal - Gloss Black | 2018-2020 Subaru Crosstrek
Sale
  • "I Heart My" Crosstrek Mountain Range Decal - Gloss Black | 2018-2020 Subaru Crosstrek
  • "I Heart My" Crosstrek Mountain Range Decal - Gloss Black | 2018-2020 Subaru Crosstrek
Was: $13.99
Now: $11.99

Description

2018-2020 Subaru Crosstrek - Decal That Goes Around your OEM Crosstrek Emblem Mountain Range

Let everyone know you Love your Crosstrek with this perfect decal. This Mountain Range Decal was designed to go around your OEM Crosstrek Emblem on the hatch.Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look without having to deal with opening up your tail light for internal modification, this is definitely the easiest route.

INSTALL GUIDE 

TOOLS REQUIRED: SQUEEGEE.

PART 1 - DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

PART 2: Once you have completed part one - dry install basics, you can move onto this step.

Start by peeling the decal off of the backing paper, line up the decal to your Crosstrek Emblem making sure it is level with the emblem. Center the Emblem inside the rectangle area, then place the two top corners. Once you are happy with the decal's placement you can begin using a squeegee, apply firm pressure to the entire product starting in the middle then moving outwards. Continue until you have removed all air from underneath the vinyl.

Now that the overlay is fully installed you can remove the transfer tape, start in one corner and pull the transfer tape back onto itself. Do not pull the transfer tape away from the vinyl, pull it downwards. This will result in less likelihood of the vinyl staying on the transfer tape. If a piece of the vinyl does not come off of the transfer tape, STOP pulling immediately, set the transfer tape back into place, squeegee that area again and then continue until it is fully removed. The Install is now complete.

SPECIFICATIONS 

• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.   

• Car wash safe. 

• Can be removed without any damage to surface.  

• 1-3 year life expectancy. 

• Check your local laws and regulations  

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING: 1/5 

MORE >> Difficulty Rating Information

 

View AllClose