Select your vehicle

Headlight Protection Film - Pre Cut | 2018+ Tesla Model 3

Calculated at Checkout
  • Headlight Protection Film - Pre Cut | 2018+ Tesla Model 3
  • Headlight Protection Film - Pre Cut | 2018+ Tesla Model 3
  • Headlight Protection Film - Pre Cut | 2018+ Tesla Model 3
  • Headlight Protection Film - Pre Cut | 2018+ Tesla Model 3


2018-2021 Tesla Model 3 

Premium Auto Styling brings you yet another inexpensive way to protect your Model 3 , thanks to headlight Protection Film Pre Cuts. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.


>> SET INCLUDES :  Driver And Passenger Side



Pro Felt Squeegee is recommended for this install. 

DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. What you'll need: A squeegee is all that is needed for this install. For Best results we recommend cleaning the surface that you'll be applying these pre cuts, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any PPF please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to start by positioning the film into place on your vehicle. Use the inner edge of the headlight closest to the hood as a guide. Align your overlay slightly over the edge of the light itself to make it easy to round the material around the edge of the headlight itself after removing all air from under the overlay. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges. Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let the adhesive set, if you would like you can use a heat gun to speed up the cure process.  



• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 1-3 year life expectancy. 



MORE >> Difficulty Rating Information


View AllClose