2018-2020 Volkswagen
The GTI comes with a great looking headlight, but if you are looking for a way to make a subtle change this Amber Delete is perfect. Easy installation, peel and stick process, outlined in our product description makes this product very DIY friendly! The overlays are precision cut from a durable vinyl for a perfect fit and aggressive styling that’s sure to look good on your vehicle! Made from quality automotive vinyl.
INSTALL GUIDE
TOOLS REQUIRED: PRO FELT SQUEEGEE
INSTALL: Getting the vinyl installed on your vehicle is only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.
After the surface is clean and you have read and completed the preparation portion of the install. Start by peeling the vinyl from the backing paper while making sure not to stretch the vinyl or warp the edges. Start with the top corner of the headlight, the corner that faces towards the rear of the vehicle. Tack the top corner then gradually lay the vinyl down following the top edge nearest to the hood until you reach the end of the overlay. If you need to reposition your first corner, carefully lift the vinyl back up. During the alignment process you shouldn't be pushing the vinyl into place or squeegeeing it down just yet. We recommend focusing on the top eyelid portion first, completing it then moving to the side portion last. Once the entire overlay is aligned you can use the squeegee to remove any and all air and moisture from underneath the vinyl.
Once complete, post heat the entire product or leave your vehicle outside in the warm sun for at least 30 minutes. Check to make sure you do not have any left over air pockets and your install is complete.
SUPERIOR QUALITY
• Includes driver and passenger side overlays ( total pieces included is 2).
• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.
• Car wash safe.
• Can be removed without any damage to surface.
• 1-3 year life expectancy.
• Check your local laws and regulations
>> DISCLAIMER INFORMATION
DIFFICULTY RATING 3/5 
Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.
