Have questions?

  • Guaranteed Fitment

    Designed and tested in-house

  • In-House Experts

    We know our products

  • Pre-Cut Products

    DIY friendly installation

  • Wordwide Delivery

    Free USA Shipping over $49

Headlight Amber Delete Vinyl Overlay - Dark Smoke Tint | 2012-2021 Nissan NV1500-3500

$32.99
$29.99
SKU: A-178-DK-LUX
Availability: A subtle change to the front end that drastically changes the overall appearance. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all produc
Shipping: Calculated at Checkout
Adding to cart… The item has been added

Nissan NV1500-3500 - Pre-Cut Air Release Dark Smoke Tint - Headlight Amber Delete Overlay

A subtle change to the front end that drastically changes the overall appearance. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay. 

INSTALL GUIDE 

TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN or Warm Sunny Day to Post Heat the product 

PART 1 - DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

PART 2: Once you have completed part one - dry install basics, you can move onto this step.

Note: This overlay is made so no trimming should be required, although incorrect placement can cause excess along some edges.

Start by aligning the top corner and outer edge of the overlay to the outer edge of the headlight, once completed you can gradually lay the vinyl into place making sure the outer edge falls into place correctly. Before continuing to the next step, confirm that you're happy with your placement, if not, gently peel up the vinyl and place again. With it's air release technology this should be no problem as long as you did not press the vinyl down completely already.

Now that you're happy with your placement, use a squeegee, starting in the center of the overlay moving outwards towards the edges with firm pressure to push out any air from underneath the vinyl as you are applying it to the surface. 

Go back over the entirety of the overlay with a squeegee to insure all air has been removed from underneath the vinyl, and then all that is left to do is use a heat gun to post heat the material, or leave the vinyl in the warm sun for a couple of hours to set completely.

SPECIFICATIONS 

• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.   

• Car wash safe. 

• Can be removed without any damage to surface.  

• 1-3 year life expectancy. 

• Check your local laws and regulations  

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING: 3/5 

MORE >> Difficulty Rating Information

 

Customers Also Viewed