2016-2019 Honda Civic Type-R

Our V2 option for the Type R is simply a more subtle variation of the V1, maybe you don't want to be as bold on the front end but still stand out. Making your Type R stand out can be easier than you think, whether you're taking it to the track, shows, or just want to make it your own, this product is made to be different. Made to stand out! It does take some vinyl experience during installation to avoid wrinkles but it's fairly easy to line up and with it being made out of quality wrap vinyl instead of sticker vinyl it is far more forgiving. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN or Warm Sunny Day to Post Heat the product 

DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

FULL INSTALL: After the surface is clean and you have read and completed DRY INSTALL BASICS, Start by removing the vinyl from the backing paper, As shown in INSTALL GUIDE EXAMPLE A, (PHOTO ABOVE) align Edge A to the vehicle with the front bumper fascia, then align Edge B. Start laying the material into place starting with Edge A. Follow that edge back and forth as you gradually move inwards with your pro-felt squeegee pressing the vinyl into place removing any and all air from underneath the vinyl. Continue until all the vinyl is set in place, now use a heat gun to post heat the product. Or leave the vehicle out in the sun for a couple hours to insure proper adhesion. Install is complete.

SPECIFICATIONS 

• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.   

• Car wash safe. 

• Can be removed without any damage to surface.  

• 1-3 year life expectancy. 

• Check your local laws and regulations  

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING: 2/5 

MORE >> Difficulty Rating Information