2016-2019 Honda Civic Type-R

Accents can set your vehicle apart from the rest and what better way to do that by adding a Type R Style Badge Accent that follows the line styling of the fender vent. Simple Peel and Stick Decal Overlay with a R logo cut out is placed next to the fender vent section on your door and gives the side profile a different subtle look. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE 

TOOLS REQUIRED: PRO FELT SQUEEGEE, HEAT GUN or Warm Sunny Day to Post Heat the product 

DRY INSTALL BASICS: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 65 degrees (F), and up to 90 degrees (F). Vinyl has a more difficult time conforming and staying in place in colder temperatures though, which is why we recommend waiting until temperatures warm up or install in a temperature controlled environment.

FULL INSTALL: After the surface is clean and you have read and completed DRY INSTALL BASICS, Start by removing the vinyl from the backing paper, line up the vinyl with the top line of the fender vent and place the product on the door so it overhangs the gap just enough to wrap around the edge so no paint color shows. Place the vinyl and squeegee it down into place starting from the center moving outwards until all air is removed from underneath the vinyl. Put extra pressure on the section that has transfer tape on it then very slowly peel back the transfer tape onto itself. Do not pull directly away from the vinyl as it is more likely to pull up parts of the vinyl cut out. Once you have fully removed the transfer tape, post heat the product and the install is complete.

SPECIFICATIONS 

• Includes Driver and Passenger Side Overlay

• Automotive Grade Adhesive backed vinyl with air release technology for easy installation and removal.   

• Car wash safe. 

• Can be removed without any damage to surface.  

• 1-3 year life expectancy. 

• Check your local laws and regulations  

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING: 1/5 

MORE >> Difficulty Rating Information