2018-2019 Tesla Model 3 

Accidents happen and we know, Premium Auto Styling brings you a way to protect your Model 3 , thanks to our center console overlays. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This easy peal and stick vinyl accent overlay looks OEM when properly installed. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay. We know the console already comes with Piano Black but in order to protect the paint without having to have someone else install PPF for you this is a great protection alternative if you are the type of person that likes to do it yourself. 

Note: THIS IS NOT A FULL COVERAGE PRODUCT. IN ORDER TO KEEP THIS OVERLAY AS DIY FRIENDLY AS POSSIBLE WE DESIGNED IT SO THE OVERLAY DID NOT NEED TO BE MOLDED INTO THE INNER EDGES OF THE CUP HOLDER. INSTEAD IT SITS ON THE OUTSIDE EDGE BUT STILL KEEPS A CLEAN FINISHED LOOK. PLACEMENT WILL DICTATE END RESULT.

>> SET INCLUDES :  Top, Middle And Bottom Cupholder section

INSTALL GUIDE 

DRY INSTALL: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. A squeegee is the only tool you should need for this install. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F). Let's begin, You’ll first want to start by positioning the vinyl into place on your console one piece at a time. Starting with the bottom cup holder piece is an easy way to start. Using the center of the overlay that juts out towards the center of the cupholder as a guide to line up the corners is a great start. Making sure there is an even gap between the edge of the cupholder itself and the corners you will be lining up should allow the rest of the overlay to fall into place very easily. Using a squeegee, start from the center and begin pushing the air from beneath the overlay toward the edges. Repeat this method for the second cup holder piece. Then for the last two pieces line up the outer corners as your reference and the rest should fall into place. The Middle and Top console overlays have a thin amount of excess material for you to use to round over the edges of these two pieces of the console. in order to do so. Lay the entirety of the overlay first and squeegee them down, then once you are done you can open the portion of the console you are working on to gain better access to the edges. Simply press the material down around the edges and apply firm pressure all the way around. 

SUPERIOR QUALITY 

• Adhesive backed film for easy installation and removal.  
• Maintenance free & car wash safe. 
• Can be removed without any damage to surface. 
• 2-5 year life expectancy. 

>> DISCLAIMER INFORMATION 

DIFFICULTY RATING 2/5

MORE >> Difficulty Rating Information