Have questions?
Designed and tested in-house
We know our products
DIY friendly installation
Free USA Shipping over $49
This overlay for your headlight reflectors add great styling for a low price! Our overlays are precision cut from a durable dark smoke tint or automotive grade gloss black vinyl for a perfect fit and aggressive styling that’s sure to look good on any color Veloster! Application takes roughly 20 minutes to complete the entire project.
QUICK INSTALL GUIDE:
Smoke Tint: Getting the smoke tint installed on your ride is very easy and only requires a spray bottle filled with a little soap and water, and a felt edge squeegee. You’ll first want to spray / mist the back side of the tint very lightly and then position it into place on the headlight. Use that squeegee to push out and remove any excess bubbles from underneath the vinyl, then leave your car in the sun for a few hours just to let everything dry, you can use a heat gun to speed up the drying process if you would like. This entire process should take you no more than 20 minutes to complete.
Complete Black Out: The Gloss black vinyl is even easier to install and it only requires a squeegee. We recommend the Pro Felt Squeegee for this install as it makes it less likely to scratch the vinyl during install. First position it into headlight of your vehicle. Use that squeegee or your fingers to push out and remove any excess air bubbles from underneath the vinyl. This entire process should take you about 15 minutes to complete.
This install is a 2 out 5 in Difficulty. - CARBON FIBER OVERLAY
Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TOO HARD AT ALL REALLY)FEATURES & SPECIFICATIONS
