2020-2022 SUBARU OUTBACK | 3RD BRAKE LIGHT OVERLAY - SMOKE TINT
IS that RED 3rd Brake Light sticking out like a sore thumb on your Outback? Our Smoke Tint 3rd Brake Light Overlay fixes that problem! Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This product is applied to the face of your Outback's 3rd Brake Light and dramatically changes the look of the rear end. Unlike most eBay or Amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours.
DRY INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools.
Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch)
Blade (only necessary for overlays that have extra material that needs to be trimmed)
Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations)
For the Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process we recommend using a clay bar. CLEANING PREP SPRAY & CLAY BAR's SOLD HERE).
Before you begin installation of any vinyl overlays please make sure you are working in the right conditions. You should never install our products in direct sunlight. Also never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature range for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed in temperatures as low as 50 degrees (F), and up to 90 degrees (F).
To begin, you first want to start by positioning the overlay into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - sometimes you may need a heat gun will be needed to help conform the material to aggressive bends and or corners.
TRIMMING: some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required.
Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let the adhesive set, if you would like you can use a heat gun to speed up the cure process.
FEATURES & SPECIFICATIONS
• Includes 1 3rd Brake Light Overlay in Smoke Tint
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
• Medium Smoke Tint
This install is a 1 out 5 in Difficulty.
Difficulty Rating of 1 is used for overlays that are easy for everyone including first time DIYers. (PIECE OF CAKE)
Excited about your installed Product? Let us know! Take a picture, and tag us on Instagram! @premiumautostyling
Interested in a custom color or finish for this product. Contact our team at [email protected] and we can look into your request before you place your order.