Have questions?
888-637-0055
Ask an Experts-
Guaranteed Fitment
Designed and tested in-house
-
In-House Experts
We know our products
-
Pre-Cut Products
DIY friendly installation
-
Wordwide Delivery
Free USA Shipping over $49
2022+ SUBARU WRX | HEADLIGHT FACE TINT OVERLAY - YELLOW TINT
Stylize & Protect the headlights on your new WRX with our Headlight Face Tint Overlay in Rally Yellow Tint Film. This product covers the front face on your headlight and also adds a layer of protection to your headlights. **THIS OVERLAY ONLY FITS THE BASE WRX AND WRX PREMIUM TRIM LEVEL** **DOES NOT FIT WRX LIMITED OR GT MODELS (DIFFERENT STYLE OF HEADLIGHTS)
Premium Auto Styling Overlays are precision cut by our computers using Premium Automotive Grade Films. Unlike other companies, Premium Auto Styling Overlays are designed and produced in the USA in our own facility. We design & fit all of our products to ensure you the best fitment & results. Don't pass up this item to stylize and protect your vehicle!
INSTALLATION GUIDE
WET INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools.
Tools Needed:
- Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch)
- Premium Surface Lube (you can make your own by filling a spray bottle with 16 oz of water and 1 drop of dish soap)
- Blade (only necessary for overlays that have extra material that needs to be trimmed)
- Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations)
For Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE).
Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).
To begin, you first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - you may need a heat gun to help conform the material to aggressive bends and or corners.
TRIMMING, some overlays are intentionally designed slightly oversized for the ease of application, in this case minor trimming may be required.
Once you've completed the install we recommend that you leave your car in the sun for up to 30 minutes just to let everything dry, if you would like you can use a heat gun to speed up the drying process.
FEATURES & SPECIFICATIONS
• Includes driver and passenger side overlays (2 piece kit)
• Adhesive backed film for easy installation and removal.
• Maintenance free & car wash safe.
• Can be removed without any damage to surface.
• 2-5 year life expectancy.
AVAILABLE COLORS
• Medium Smoke Tint
This install is a 2.5 out 5 in Difficulty.
Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TO HARD AT ALL REALLY)
Difficulty Rating of 3 is used for overlays that need just a little time and patience when installing. Extra care is required to help with alignment and getting the film to lay down correctly. (TAKE YOUR TIME YOU'LL BE FINE)
Interested in a custom color or finish for this product? Contact our team at orders@premiumautostyling.com and we can look into your request before you place your order.